We're here to help

    Ambir Scanner Pre-Defined Buttons Crashing CDP Software


    Currently this problem is only known to happen when using the Ambir 490i, but may happen on other Ambir models


    When trying to scan in CDPTeller/Central using an Ambir scanner and using the "Pre-Defined" buttons when the scanner interface shows up,CDPTeller/Central may crash


    How to fix this issue:

    1) Open up CDPCentral and Select Tools>setup>enter password>scanners

    2) Make sure "Batch" is selected next to Batch Scan Max Images and not One Page

    3) For the change to take effect close down any open CDPTeller/Central             applications 



    Was this article helpful?
    0 out of 0 found this helpful